一）移動式攪拌器
   專利夾頭，無松動、無搖擺、不會脫落，可靠。鍍鉻支桿，下粗上細，鋼性強、結構合理。具有移動方便,重量輕等優點.適合各類小型容器。攪拌器是一種使液體、氣體介質強迫對流并均勻混合的器件。攪拌器的類型、尺寸、轉速、功率等參數，對介質攪拌混合的效果有著重要影響。不同的攪拌過程需要由不同的攪拌裝置運行來實現，在設計選型時首先要根據工藝對攪拌作業的目的和要求確定攪拌器的類型、電機功率、攪拌速度，然后選擇減速機，機架、攪拌軸、軸封等各部件。使用獨特的虎鉗，可在開式槽上部邊緣直接安裝。工作時，攪拌軸偏離槽的中央位置，而且與垂直方向傾斜一定角度。攪拌軸與垂直方向傾斜夾角為5°～20°，因而根據魯辛頓(Rushton)理論，在槽內即使不安裝擋板也不會出現打旋現象或局部死區，攪拌效率高。小型輕便、結構簡單。 
二）推進式（側入）攪拌器
   側入式攪拌機是將攪拌裝置安裝在設備筒體的側壁上，攪拌機上的攪拌器通常采用軸流型，以推進式攪拌器為多，在消耗同等功率情況下，能有高的攪拌效果，功率消耗僅為頂攪拌的1/3～2/3，成本僅為頂攪拌的1/4～1/3。轉速可在200～750r/min。 
   廣泛用于脫硫、除硝以及各種大型貯罐或貯槽的攪拌。特別是在大型貯槽或貯罐中利用一臺或多臺側入式攪拌機一起工作，在消耗低能耗的情況下便可以良好的攪拌效果。 
三）錨式（框式）攪拌器
   錨式、框式攪拌器屬于同一類，統稱錨框式攪拌器，該種攪拌器的葉輪槳徑對罐徑之比較大。使用于低粘度液體時，錨式葉輪的葉徑與罐徑比為0.7～0.9，對于高黏度液體則為0.8～0.95.轉速通常為10～50r/min。 
   為了增大攪拌范圍和帶走罐壁上的殘留物或液層，錨框式攪拌器的外廓要接近攪拌罐的內壁，其底部的形狀為適應罐底的輪廓也有橢圓、錐形等。為了增大對高粘度物料的攪拌范圍以及提高葉輪的剛性，還常常要在錨式及框式上增加一些立葉和橫梁，這樣使得錨框式的結構形狀出現了多種多樣。 
四）折葉（漿式）攪拌器
   折葉漿式攪拌器是典型的軸流型攪拌器,高排液量,低剪切性能;采用擋板或導流筒則軸向循環更強.因為它循環能力強,動力消耗低,在低黏度大容量均相,混合過程中應用能體現它的優勢.在低黏度的液體傳熱,反應,懸液,液液溶解等過程中應用廣泛 
   常用介質黏度小于2000mPa.s,常用轉速n=200—900rpm,DJ/D容器徑=0.2—0.4,溶位較深大于DJ的7倍以時上可采用雙層葉輪.安裝時可垂直安裝,或小于15o傾斜安裝.偏離容器中心或傾斜安裝時,相當于容器內加擋板。